Index: /qrda/schematron/QRDA_CategoryI.xml =================================================================== --- /qrda/schematron/QRDA_CategoryI.xml (revision 906) +++ /qrda/schematron/QRDA_CategoryI.xml (revision 906) @@ -0,0 +1,251 @@ + + + + + + + + + + + + + QRDA Incidence Report + + + + + + + + + + Henry + Levin + the 7th + + + + + + + + + + + + + + + + Good Health Clinic + + + + + + + + + Good Health Clinic + + + + + + + + + + + +
+ + + Measure Set: NQF Pneumonia Measure Set, V2.5 + ... (optional) description of measure set ... + + +
+ + + + + + Measure Section + + + NQF PN-1: Oxygenation Assessment, V2.5 + NQF PN-4: Adult Smoking Cessation Advice/Counseling, V2.5 + NQF PN-6a: Initial Antibiotic Selection for CAP in Immunocompetent - ICU Patient, V2.5 + + + + + + + + + ... (optional) description of measure ... + + + + + + + + ... (optional) description of measure ... + + + + + + + + ... (optional) description of measure ... + + + + + +
+ + Reporting Parameters + + + Reporting period: 01 Jan 2008 - 31 Mar 2008 + + + + + + + + + + + +
+ + + +
+ + Patient Data + + + Admission Date: 13 Feb 2008 + Discharge Date: 20 Feb 2008 + ICD Diagnosis Codes: 481 (Pneumococcal pneumonia) + Initial Oxygen Saturation: 85% + Initial Antibiotics: Levofloxacin 500mg IV q24 hours + Smoker: Yes + Smoking Cessation Counseling Provided: Yes + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ + + + + + + +
+ +
+ +
+ + + + Index: /qrda/schematron/go.sh =================================================================== --- /qrda/schematron/go.sh (revision 906) +++ /qrda/schematron/go.sh (revision 906) @@ -0,0 +1,2 @@ +java -jar saxon9he.jar -o schema_compiled.xsl qrdaCat1.sch iso_schematron_message_xslt2.xsl +java -jar saxon9he.jar QRDA_CategoryI.xml schema_compiled.xsl Index: /qrda/schematron/go.sh~ =================================================================== --- /qrda/schematron/go.sh~ (revision 906) +++ /qrda/schematron/go.sh~ (revision 906) @@ -0,0 +1,3 @@ +java -jar saxon9he.jar -o schema_compiled.xsl qrdaCat1.sch iso_ +schematron_message_xslt2.xsl +java -jar saxon9he.jar QRDA_CategoryI.xml schema_compiled.xsl Index: /qrda/schematron/iso_schematron_message_xslt2.xsl =================================================================== --- /qrda/schematron/iso_schematron_message_xslt2.xsl (revision 906) +++ /qrda/schematron/iso_schematron_message_xslt2.xsl (revision 906) @@ -0,0 +1,55 @@ + + + + + + + + + + + + + + + + + + + + + + + ( + / + ) + + + Index: /qrda/schematron/iso_schematron_skeleton.xsl =================================================================== --- /qrda/schematron/iso_schematron_skeleton.xsl (revision 906) +++ /qrda/schematron/iso_schematron_skeleton.xsl (revision 906) @@ -0,0 +1,2299 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + #ALL + + + +false + +true + + + + + true + false + + + + + + + true + false + + + + + + + + + @*| + + * + node() + *|comment()|processing-instruction() + + + + + + + + + + +false + + +default + + +1 + +false + + + + + + 1 + + + + + + + + + + + + + + + + + 2 + + + + + + 1.0 + + + + + + + + + This XSLT was automatically generated from a Schematron schema. + + + + + 1.0 + + + + + + + + + + + + 2.0 + + + + + + + + + + 3a + + 3b + + + + + Implementers: please note that overriding process-prolog or process-root is + the preferred method for meta-stylesheets to use where possible. + + + + + + + + + + + + PHASES + + PROLOG + + XSD TYPES FOR XSLT2 + + KEYS AND FUNCTIONS + + DEFAULT RULES + + SCHEMA SETUP + + SCHEMATRON PATTERNS + + + + + + + + + + + + + + + + + + + + + + + + 4a + + 4b + + + + + + + MODE: SCHEMATRON-SELECT-FULL-PATH + This mode can be used to generate an ugly though full XPath for locators + + + + + + + + + + + + + + + + + + + + + + + + + MODE: SCHEMATRON-FULL-PATH + This mode can be used to generate an ugly though full XPath for locators + + + + + + / + + + + *: + + [namespace-uri()=' + + '] + + + + [ + + ] + + + + + + / + + + + + + [] + + + + *[local-name()=' + + '] + + + [] + + + + + + + + + + + + + + + / + + @ + + @*[local-name()=' + + ' and namespace-uri()=' + + '] + + + + + + + / + + @ + + @*[local-name()=' + + ' and namespace-uri()=' + + '] + + + + + + + + + + MODE: SCHEMATRON-FULL-PATH-2 + + This mode can be used to generate prefixed XPath for humans + + + + + + / + + + [ + + ] + + + + + /@ + + + + + MODE: SCHEMATRON-FULL-PATH-3 + + + This mode can be used to generate prefixed XPath for humans + (Top-level element has index) + + + + + + / + + + [ + + ] + + + + + /@ + + + + + MODE: GENERATE-ID-FROM-PATH + + + + + + + + + + + + + + + + + + + + + + . + + + + + + + + MODE: GENERATE-ID-2 + + + U + + + U + + + + + U. + + n + + + + + U. + + _ + + _ + + + + + Strip characters + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 5 + + + + 6a + + 6b + + + + + + + + 7 + + + ASSERT + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 8 + + + + REPORT + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 9 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 10 + + + + 11a + + 11b + + + + + + + + + + + + + + + + + + + + + + 12 + + + 13 + + + + + + + + + + + + + + + + 14 + + + + + + + + + + + + 15 + + + + + + 16 + + + + + + + + 17 + + + + + + + + + 18 + + + + + + + + + + + + + + 19 + + + + + + + + 20a + + 20b + + + + 21 + + + + + + + + + + + + 20a + + 20b + + + + 21 + + + + + + + + + + + + + + + 19 + + + + + + + 21 + + + + + + + + + + + 21 + + + + + + + + + + + + + + + + 22 + + + + + + + + + 23 + + + + + + 24 + + + 25 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 26 + + + 27 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + //( + + ( + + ) + | + + ) + [not(self::text())] + + + + + + + + + //( + + ( + + ) + | + + ) + [not(self::text())] + + + + + + + + + + + + + + + + + + + + + + + 28 + + + + + + + + PATTERN + + + + + + + + + + + + + + + + + + + + 29 + + + + + + + + + + No property found with that ID + + + + + + + + + + + + + + + + + + + + + + + + + + 30 + + + + + RULE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 31 + + + 32 + + + + + + 33 + + + + + + + + + + + + + + + + + + + + + + + + + + + 34 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 35a + + 35b + + + + + + + + + + + + + + + + + + + + + + + + + 36a + + 36b + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 36a + + 36b + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 37a + + 37b + + + + + + + + + + + + + + + + + + + 38a + + 38b + + + + + + + + + + + + 39a + + 39b + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + TERMINATING + + + TERMINATING + + + + + + + + + + + + + + + + + + + + + + + + + + + + + TERMINATING + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + title + + + + + + + schema-title + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Schema error: Schematron elements in old and new namespaces found + Schema error: in the queryBinding attribute, use 'xslt' + Fail: This implementation of ISO Schematron does not work with schemas using the query language + + Phase Error: no phase has been defined with name + + Markup Error: no pattern attribute in <active> + Reference Error: the pattern " + " has been activated but is not declared + Markup Error: no test attribute in <assert + Markup Error: no test attribute in <report> + Markup Error: no id attribute in <diagnostic> + Markup Error: no rule attribute in <extends> + Reference Error: the abstract rule " + " has been referenced but is not declared + Markup Error: no name attribute in <key> + Markup Error: no path or use attribute in <key> + Markup Error: no path or use attribute in <key> + Schema error: The key element is not in the ISO Schematron namespace. Use the XSLT namespace. + Markup Error: no name attribute in <function> + Schema error: The function element is not in the ISO Schematron namespace. Use the XSLT namespace. + Schema error: Empty href= attribute for include directive. + Error: Impossible URL in Schematron include + Unable to open referenced included file: + + Schema error: Use include to include fragments, not a whole schema + Schema error: XSD schemas may only be imported if you are using the 'xslt2' query language binding + Schema error: The import-schema element is not available in the ISO Schematron namespace. Use the XSLT namespace. + Warning: Variables should not be used with the "xpath" query language binding. + Warning: Variables should not be used with the "xpath2" query language binding. + Markup Error: no uri attribute in <ns> + Markup Error: no prefix attribute in <ns> + Schema implementation error: This schema has abstract patterns, yet they are supposed to be preprocessed out already + Markup Error: no id attribute in <phase> + Markup Error: no context attribute in <rule> + Markup Error: no id attribute on abstract <rule> + Markup Error: (2) context attribute on abstract <rule> + Markup Error: context attribute on abstract <rule> + Markup Error: no select attribute in <value-of> + Warning: + must not contain any child elements + Reference error: A diagnostic " + " has been referenced but is not declared + Using the XSLT namespace with a prefix other than "xsl" in Schematron rules is not supported in this processor: + + Error: unrecognized element in ISO Schematron namespace: check spelling and capitalization + + Warning: unrecognized element + + + + + + Index: /qrda/schematron/iso_schematron_skeleton_for_saxon.xsl =================================================================== --- /qrda/schematron/iso_schematron_skeleton_for_saxon.xsl (revision 906) +++ /qrda/schematron/iso_schematron_skeleton_for_saxon.xsl (revision 906) @@ -0,0 +1,2299 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + #ALL + + + +false + +true + + + + + true + false + + + + + + + true + false + + + + + + + + + @*| + + * + node() + *|comment()|processing-instruction() + + + + + + + + + + +false + + +default + + +1 + +false + + + + + + 1 + + + + + + + + + + + + + + + + + 2 + + + + + + 1.0 + + + + + + + + + This XSLT was automatically generated from a Schematron schema. + + + + + 1.0 + + + + + + + + + + + + 2.0 + + + + + + + + + + 3a + + 3b + + + + + Implementers: please note that overriding process-prolog or process-root is + the preferred method for meta-stylesheets to use where possible. + + + + + + + + + + + + PHASES + + PROLOG + + XSD TYPES FOR XSLT2 + + KEYS AND FUNCTIONS + + DEFAULT RULES + + SCHEMA SETUP + + SCHEMATRON PATTERNS + + + + + + + + + + + + + + + + + + + + + + + + 4a + + 4b + + + + + + + MODE: SCHEMATRON-SELECT-FULL-PATH + This mode can be used to generate an ugly though full XPath for locators + + + + + + + + + + + + + + + + + + + + + + + + + MODE: SCHEMATRON-FULL-PATH + This mode can be used to generate an ugly though full XPath for locators + + + + + + / + + + + *: + + [namespace-uri()=' + + '] + + + + [ + + ] + + + + + + / + + + + + + [] + + + + *[local-name()=' + + '] + + + [] + + + + + + + + + + + + + + + / + + @ + + @*[local-name()=' + + ' and namespace-uri()=' + + '] + + + + + + + / + + @ + + @*[local-name()=' + + ' and namespace-uri()=' + + '] + + + + + + + + + + MODE: SCHEMATRON-FULL-PATH-2 + + This mode can be used to generate prefixed XPath for humans + + + + + + / + + + [ + + ] + + + + + /@ + + + + + MODE: SCHEMATRON-FULL-PATH-3 + + + This mode can be used to generate prefixed XPath for humans + (Top-level element has index) + + + + + + / + + + [ + + ] + + + + + /@ + + + + + MODE: GENERATE-ID-FROM-PATH + + + + + + + + + + + + + + + + + + + + + + . + + + + + + + + MODE: GENERATE-ID-2 + + + U + + + U + + + + + U. + + n + + + + + U. + + _ + + _ + + + + + Strip characters + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 5 + + + + 6a + + 6b + + + + + + + + 7 + + + ASSERT + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 8 + + + + REPORT + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 9 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 10 + + + + 11a + + 11b + + + + + + + + + + + + + + + + + + + + + + 12 + + + 13 + + + + + + + + + + + + + + + + 14 + + + + + + + + + + + + 15 + + + + + + 16 + + + + + + + + 17 + + + + + + + + + 18 + + + + + + + + + + + + + + 19 + + + + + + + + 20a + + 20b + + + + 21 + + + + + + + + + + + + 20a + + 20b + + + + 21 + + + + + + + + + + + + + + + 19 + + + + + + + 21 + + + + + + + + + + + 21 + + + + + + + + + + + + + + + + 22 + + + + + + + + + 23 + + + + + + 24 + + + 25 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 26 + + + 27 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + //( + + ( + + ) + | + + ) + [not(self::text())] + + + + + + + + + //( + + ( + + ) + | + + ) + [not(self::text())] + + + + + + + + + + + + + + + + + + + + + + + 28 + + + + + + + + PATTERN + + + + + + + + + + + + + + + + + + + + 29 + + + + + + + + + + No property found with that ID + + + + + + + + + + + + + + + + + + + + + + + + + + 30 + + + + + RULE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 31 + + + 32 + + + + + + 33 + + + + + + + + + + + + + + + + + + + + + + + + + + + 34 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 35a + + 35b + + + + + + + + + + + + + + + + + + + + + + + + + 36a + + 36b + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 36a + + 36b + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 37a + + 37b + + + + + + + + + + + + + + + + + + + 38a + + 38b + + + + + + + + + + + + 39a + + 39b + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + TERMINATING + + + TERMINATING + + + + + + + + + + + + + + + + + + + + + + + + + + + + + TERMINATING + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + title + + + + + + + schema-title + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Schema error: Schematron elements in old and new namespaces found + Schema error: in the queryBinding attribute, use 'xslt' + Fail: This implementation of ISO Schematron does not work with schemas using the query language + + Phase Error: no phase has been defined with name + + Markup Error: no pattern attribute in <active> + Reference Error: the pattern " + " has been activated but is not declared + Markup Error: no test attribute in <assert + Markup Error: no test attribute in <report> + Markup Error: no id attribute in <diagnostic> + Markup Error: no rule attribute in <extends> + Reference Error: the abstract rule " + " has been referenced but is not declared + Markup Error: no name attribute in <key> + Markup Error: no path or use attribute in <key> + Markup Error: no path or use attribute in <key> + Schema error: The key element is not in the ISO Schematron namespace. Use the XSLT namespace. + Markup Error: no name attribute in <function> + Schema error: The function element is not in the ISO Schematron namespace. Use the XSLT namespace. + Schema error: Empty href= attribute for include directive. + Error: Impossible URL in Schematron include + Unable to open referenced included file: + + Schema error: Use include to include fragments, not a whole schema + Schema error: XSD schemas may only be imported if you are using the 'xslt2' query language binding + Schema error: The import-schema element is not available in the ISO Schematron namespace. Use the XSLT namespace. + Warning: Variables should not be used with the "xpath" query language binding. + Warning: Variables should not be used with the "xpath2" query language binding. + Markup Error: no uri attribute in <ns> + Markup Error: no prefix attribute in <ns> + Schema implementation error: This schema has abstract patterns, yet they are supposed to be preprocessed out already + Markup Error: no id attribute in <phase> + Markup Error: no context attribute in <rule> + Markup Error: no id attribute on abstract <rule> + Markup Error: (2) context attribute on abstract <rule> + Markup Error: context attribute on abstract <rule> + Markup Error: no select attribute in <value-of> + Warning: + must not contain any child elements + Reference error: A diagnostic " + " has been referenced but is not declared + Using the XSLT namespace with a prefix other than "xsl" in Schematron rules is not supported in this processor: + + Error: unrecognized element in ISO Schematron namespace: check spelling and capitalization + + Warning: unrecognized element + + + + + + Index: /qrda/schematron/iso_schematron_text.xsl =================================================================== --- /qrda/schematron/iso_schematron_text.xsl (revision 906) +++ /qrda/schematron/iso_schematron_text.xsl (revision 906) @@ -0,0 +1,126 @@ + + + + + + + + + + + + yes + + + + + + + + + + + #ALL + + + true + 1 + true + + + + + + Importing stylesheet additions + + + + + + + + + + + : + + + + : + + + + + + + + + Index: /qrda/schematron/qrdaCat1.sch =================================================================== --- /qrda/schematron/qrdaCat1.sch (revision 906) +++ /qrda/schematron/qrdaCat1.sch (revision 906) @@ -0,0 +1,35 @@ + + + +]> + + + + + Schematron schema for validating HL7 QRDA Category I + + + + + + + + + + + + + + + + + + &ent-2.16.840.1.113883.10.20.12; + + Index: /qrda/schematron/schema_compiled.xsl =================================================================== --- /qrda/schematron/schema_compiled.xsl (revision 906) +++ /qrda/schematron/schema_compiled.xsl (revision 906) @@ -0,0 +1,721 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + / + + + + + [] + + + *[local-name()=' + + '] + + [] + + + + + / + + @ + + + @*[local-name()=' + + ' and namespace-uri()=' + + '] + + + + + + + + + / + + + [ + + ] + + + + /@ + + + + + + + / + + + [ + + ] + + + + /@ + + + + + + + + + + + + + + + + + + + + + + + + . + + + + +U + + U + + + + U. + + n + + + + U. + + _ + + _ + + + + + + + + + + + + + + + + + + + + + + + + + + Error: CONF-QRDA-I-5: The value of one ClinicalDocument/templateId/@root SHALL be + 2.16.840.1.113883.10.20.12 representing conformance to the generic + QRDA Category I framework constraints. + (.//cda:templateId/@root="2.16.840.1.113883.10.20.12") + + + + + + + + + + + + + + Error: CONF-QRDA-I-2: The realmCode element SHALL be present where the value of @code is US. + (cda:realmCode[@code = "US"]) + + + + + + + + + Error: CONF-QRDA-I-3: The value of typeId/@root SHALL be 2.16.840.1.113883.1.3 and value of + typeId/@extension SHALL be POCD_HD000040. + (cda:typeId[@root = "2.16.840.1.113883.1.3" and @extension = "POCD_HD000040"]) + + + + + + + + + Error: CONF-QRDA-I-6: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/code with a value of 55182-0 2.16.840.1.113883.6.1 + LOINC STATIC. + (count(cda:code) = 1 and cda:code[@code="55182-0" and @codeSystem="2.16.840.1.113883.6.1"]) + + + + + + + + + Error: CONF-QRDA-I-7: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/title element valued with a case-insensitive, text + string containing "QRDA Incidence Report" or "Quality measure + Report". + (contains(translate(cda:title,'QWERTYUIOPASDFGHJKLZXCVBNM','qwertyuiopasdfghjklzxcvbnm'),'qrda incidence report') or contains(translate(cda:title,'QWERTYUIOPASDFGHJKLZXCVBNM','qwertyuiopasdfghjklzxcvbnm'),'quality measure report')) + + + + + + + + + Error: CONF-QRDA-I-8: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/recordTarget/PatientRole. + (count(cda:recordTarget/cda:patientRole) = 1) + + + + + + + + + Error: CONF-QRDA-I-9: A QRDA Category I report SHALL contain one or more + ClinicalDocument/author/assignedAuthor/assignedPerson and/or + ClinicalDocument/author/assignedAuthor/assignedAuthoringDevice. + (cda:author/cda:assignedAuthor/cda:assignedPerson or cda:author/cda:assignedAuthor/cda:assignedAuthoringDevice) + + + + + + + + + Error: CONF-QRDA-I-10: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/informant, which represents the reporting facility. + CONF-QRDA-I-11: An organization source of information SHALL be represented with + informant. + (count(cda:informant) = 1) + + + + + + + + + Error: CONF-QRDA-I-12: A QRDA Category I report SHALL contain exactly one + custodian/assignedCustodian/representedCustodianOrganization/ + id element. + CONF-QRDA-I-13: The value of custodian/assignedCustodian/ + representedCustodianOrganization/id element @root SHALL be the id + root of the custodian organization. + (cda:custodian/cda:assignedCustodian/cda:representedCustodianOrganization/cda:id/@root or cda:custodian/cda:assignedCustodian/cda:representedCustodianOrganization/cda:id[@nullFlavor="MSK"]) + + + + + + + + + Error: CONF-QRDA-I-15: If present, a QRDA Category I report legalAuthenticator SHALL + contain exactly one ClinicalDocument/legalAuthenticator/time element. + (not(cda:legalAuthenticator) or count(cda:legalAuthenticator/cda:time) = 1) + + + + + + + + + Error: CONF-QRDA-I-16: If present, a QRDA Category I report legalAuthenticator SHALL + contain exactly one signatureCode element. + (not(cda:legalAuthenticator) or count(cda:legalAuthenticator/cda:signatureCode) = 1) + + + + + + + + + Error: CONF-QRDA-I-17: The value of a QRDA ClinicalDocument/signatureCode/@code + SHALL be S. + (not(cda:legalAuthenticator) or cda:legalAuthenticator/cda:signatureCode[@code="S"] or cda:legalAuthenticator/cda:signatureCode[@nullFlavor="MSK"]) + + + + + + + + + Error: CONF-QRDA-I-18: If present, a QRDA Category I report legalAuthenticator SHALL + contain exactly one assignedEntity element that represents the legal + authenticator of the document. + (not(cda:legalAuthenticator) or cda:legalAuthenticator/cda:assignedEntity) + + + + + + + + + Error: CONF-QRDA-I-19: The ClinicalDocument/legalAuthenticator/assigned entity + SHALL contain an id element. + (not(cda:legalAuthenticator) or cda:legalAuthenticator/cda:assignedEntity/cda:id) + + + + + + + + + Error: CONF-QRDA-I-20: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/component/structuredBody. + (cda:component/cda:structuredBody) + + + + + + + + + Error: CONF-QRDA-I-21: A QRDA Category I report SHALL contain at least one and MAY contain + more than one Measure section each containing information about a single measure. + (count(.//cda:section/cda:code[@code="55186-1" and @codeSystem="2.16.840.1.113883.6.1"]) > 0) + + + + + + + + + + + + + + Error: CONF-QRDA-I-22: The Measure section SHALL be a top-level section if it is not part of a + measure set. + (self::cda:section[parent::cda:component[parent::cda:structuredBody[parent::cda:component[parent::cda:ClinicalDocument]]]] or parent::cda:section[@code="55185-3" and @codeSystem="2.16.840.1.113883.6.1"]/cda:component) + + + + + + + + + Error: CONF-QRDA-I-33: The Measure section SHALL contain at least one templateId uniquely + identifying each Measure name and version + (cda:templateId) + + + + + + + + + Error: CONF-QRDA-I-36: A non-nested Measure section SHALL be valued with section/title + with a case-insensitive, text string containing "measure section: + <measure name>". + (not(parent::cda:section[@code="55185-3" and @codeSystem="2.16.840.1.113883.6.1"]/cda:entry) or contains(translate(cda:title,"QWERTYUIOPASDFGHJKLZXCVBNM","qwertyuiopasdfghjklzxcvbnm"),"measure section: ")) + + + + + + + + + Error: CONF-QRDA-I-37: A nested Measure section SHALL be valued with section/title with + a case-insensitive, text string containing "measure section". + (not(parent::cda:ClinicalDocument/cda:component/cda:structuredBody/cda:component/cda:section) or contains(translate(cda:title,"QWERTYUIOPASDFGHJKLZXCVBNM","qwertyuiopasdfghjklzxcvbnm"),"measure section")) + + + + + + + + + Error: CONF-QRDA-I-39: A Measure section SHALL contain exactly one nested Reporting + Parameters section (as described in Section 2.4.3 Reporting Parameters + Section). + (count(.//cda:section[cda:code[@code = "55187-9" and @codeSystem="2.16.840.1.113883.6.1"]]) = 1) + + + + + + + + + Error: CONF-QRDA-I-40: A Measure section SHALL contain exactly one nested Patient Data + section (as described in Section 2.4.4 Patient Data Section). + (count(.//cda:section[cda:code[@code = "55188-7" and @codeSystem="2.16.840.1.113883.6.1"]]) = 1) + + + + + + + + + Error: CONF-QRDA-I-42: Each measure SHALL be represented with act. + CONF-QRDA-I-43: For each act in the Measure section, the value for act/@classCode + in a measure act SHALL be ACT 2.16.840.1.113883.5.6 ActClass STATIC. + CONF-QRDA-I-44: For each act in the Measure section the act/@moodCode in a + measure act SHALL be DEF 2.16.840.1.113883.5.1001 ActMood STATIC. + (cda:entry/cda:act[@classCode="ACT" and @moodCode="DEF"]) + + + + + + + + + + + + + + Error: CONF-QRDA-I-45: For each act in the Measure section there SHALL be an act/code + reflecting the measure name and version. + (cda:code) + + + + + + + + + + + + + + Error: CONF-QRDA-I-24: The Measure Set section SHALL contain one nested Measure section + and SHALL NOT contain more than one nested Measure section. + (count(.//cda:section[cda:code[@code="55186-1" and @codeSystem="2.16.840.1.113883.6.1"]]) = 1) + + + + + + + + + Error: CONF-QRDA-I-26: The Measure Set section SHALL contain a templateId uniquely + identifying the Measure Set name and version. + (cda:templateId) + + + + + + + + + Error: CONF-QRDA-I-29: The Measure Set section SHALL be valued with section/title with a + case-insensitive, text string containing "Measure set: <measure set + name>". + (contains(translate(cda:title,'QWERTYUIOPASDFGHJKLZXCVBNM','qwertyuiopasdfghjklzxcvbnm'),'measure set: ')) + + + + + + + + + Error: CONF-QRDA-I-31: The nested Measure section SHALL contain at least one measure that + belongs to the measure set. + (count(.//cda:section/cda:code[@code="55186-1" and @codeSystem="2.16.840.1.113883.6.1"]) > 0) + + + + + + + + + + + + + + Error: CONF-QRDA-I-49: The Reporting Parameters section SHALL be valued with + section/title with a case-insensitive, text string containing "Reporting + Parameters". + (contains(translate(cda:title,"QWERTYUIOPASDFGHJKLZXCVBNM","qwertyuiopasdfghjklzxcvbnm"),"reporting parameters")) + + + + + + + + + Error: CONF-QRDA-I-50: The Reporting Parameters section SHALL contain exactly one + Observation Parameters Act, represented as an act. + CONF-QRDA-I-51: The value for act/@classCode in an Observation Parameters Act + SHALL be ACT 2.16.840.1.113883.5.6 ActClass STATIC. + CONF-QRDA-I-52: The value for act/@moodCode in an Observation Parameters Act + SHALL be EVN 2.16.840.1.113883.5.1001 ActMood STATIC. + CONF-QRDA-I-53: The value for act/code SHALL be 252116004 Observation + Parameters 2.16.840.1.113883.6.96 SNOMED-CT STATIC. + (cda:entry/cda:act[@classCode="ACT" and @moodCode="EVN"]/cda:code[@code="252116004" and @codeSystem="2.16.840.1.113883.6.96"]) + + + + + + + + + Error: CONF-QRDA-I-54: The reporting time period SHALL be represented with an + effectiveTime/low element combined with a high element representing + respectively the first and last days of the period reported. + (cda:entry/cda:act[@classCode="ACT" and @moodCode="EVN"][cda:code[@code="252116004" and @codeSystem="2.16.840.1.113883.6.96"]]/cda:effectiveTime[cda:low and cda:high]) + + + + + + + + + + + + + + Error: CONF-QRDA-I-57: The Patient Data section SHALL be valued with section/title with a + case-insensitive, text string containing "Patient Data". + (contains(translate(cda:title,"QWERTYUIOPASDFGHJKLZXCVBNM","qwertyuiopasdfghjklzxcvbnm"),"patient data")) + + + + + + + + + + + + + + + + + + + + + Warning: CONF-QRDA-I-14: A QRDA Category I report SHOULD contain exactly one + legalAuthenticator element. + (count(cda:legalAuthenticator) = 1) + + + + + + + + + + + + + + + + + + + + + Note: CONF-QRDA-I-21: A QRDA Category I report ... MAY contain + more than one non-nested top-level Measure section each containing + information about a single measure. + (count(cda:component/cda:structuredBody/cda:component/cda:section/cda:code[@code="55186-1" and @codeSystem="2.16.840.1.113883.6.1"]) > 1) + + + + + + + + + Note: CONF-QRDA-I-23: A QRDA Category I report MAY contain one or more Measure Set + sections. + (.//cda:section/cda:code[@code="55185-3" and @codeSystem="2.16.840.1.113883.6.1"]) + + + + + + + + + Note: CONF-QRDA-I-25: A QRDA Category I report MAY contain both Measure Set sections and + individual top-level Measure sections. + (cda:component/cda:structuredBody/cda:component/cda:section/cda:code[@code="55186-1" and @codeSystem="2.16.840.1.113883.6.1"] and .//cda:section/cda:code[@code="55185-3" and @codeSystem="2.16.840.1.113883.6.1"]) + + + + + + + + + + + + + + Note: CONF-QRDA-I-41: The Measure section MAY contain a section/text element for the + description of the measure(s). + (cda:text) + + + + + + + + + + + + + + Note: CONF-QRDA-I-46: Each measure act MAY contain an act/text element containing a + description of the measure. + (cda:text) + + + + + + + + + + + + + + Note: CONF-QRDA-I-30: The Measure Set section MAY contain a section/text element for + the description of the measure set or MAY contain a formal representation of + a description of the measure set. + (cda:text) + + + + + + + + + Index: /qrda/schematron/templates/2.16.840.1.113883.10.20.12.ent =================================================================== --- /qrda/schematron/templates/2.16.840.1.113883.10.20.12.ent (revision 906) +++ /qrda/schematron/templates/2.16.840.1.113883.10.20.12.ent (revision 906) @@ -0,0 +1,284 @@ + + + + + HL7 QRDA Category I Header (Section 2) - errors validation phase + + + + Error: CONF-QRDA-I-5: The value of one ClinicalDocument/templateId/@root SHALL be + 2.16.840.1.113883.10.20.12 representing conformance to the generic + QRDA Category I framework constraints. + + + + + + Error: CONF-QRDA-I-2: The realmCode element SHALL be present where the value of @code is US. + + + Error: CONF-QRDA-I-3: The value of typeId/@root SHALL be 2.16.840.1.113883.1.3 and value of + typeId/@extension SHALL be POCD_HD000040. + + + Error: CONF-QRDA-I-6: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/code with a value of 55182-0 2.16.840.1.113883.6.1 + LOINC STATIC. + + + Error: CONF-QRDA-I-7: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/title element valued with a case-insensitive, text + string containing "QRDA Incidence Report" or "Quality measure + Report". + + + Error: CONF-QRDA-I-8: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/recordTarget/PatientRole. + + + Error: CONF-QRDA-I-9: A QRDA Category I report SHALL contain one or more + ClinicalDocument/author/assignedAuthor/assignedPerson and/or + ClinicalDocument/author/assignedAuthor/assignedAuthoringDevice. + + + Error: CONF-QRDA-I-10: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/informant, which represents the reporting facility. + CONF-QRDA-I-11: An organization source of information SHALL be represented with + informant. + + + Error: CONF-QRDA-I-12: A QRDA Category I report SHALL contain exactly one + custodian/assignedCustodian/representedCustodianOrganization/ + id element. + CONF-QRDA-I-13: The value of custodian/assignedCustodian/ + representedCustodianOrganization/id element @root SHALL be the id + root of the custodian organization. + + + Error: CONF-QRDA-I-15: If present, a QRDA Category I report legalAuthenticator SHALL + contain exactly one ClinicalDocument/legalAuthenticator/time element. + + + Error: CONF-QRDA-I-16: If present, a QRDA Category I report legalAuthenticator SHALL + contain exactly one signatureCode element. + + + Error: CONF-QRDA-I-17: The value of a QRDA ClinicalDocument/signatureCode/@code + SHALL be S. + + + Error: CONF-QRDA-I-18: If present, a QRDA Category I report legalAuthenticator SHALL + contain exactly one assignedEntity element that represents the legal + authenticator of the document. + + + Error: CONF-QRDA-I-19: The ClinicalDocument/legalAuthenticator/assigned entity + SHALL contain an id element. + + + Error: CONF-QRDA-I-20: A QRDA Category I report SHALL contain exactly one + ClinicalDocument/component/structuredBody. + + + + + Error: CONF-QRDA-I-21: A QRDA Category I report SHALL contain at least one and MAY contain + more than one Measure section each containing information about a single measure. + + + + + + + + + + + Error: CONF-QRDA-I-22: The Measure section SHALL be a top-level section if it is not part of a + measure set. + + + + Error: CONF-QRDA-I-33: The Measure section SHALL contain at least one templateId uniquely + identifying each Measure name and version + + + Error: CONF-QRDA-I-36: A non-nested Measure section SHALL be valued with section/title + with a case-insensitive, text string containing "measure section: + <measure name>". + + + Error: CONF-QRDA-I-37: A nested Measure section SHALL be valued with section/title with + a case-insensitive, text string containing "measure section". + + + Error: CONF-QRDA-I-39: A Measure section SHALL contain exactly one nested Reporting + Parameters section (as described in Section 2.4.3 Reporting Parameters + Section). + + + Error: CONF-QRDA-I-40: A Measure section SHALL contain exactly one nested Patient Data + section (as described in Section 2.4.4 Patient Data Section). + + + Error: CONF-QRDA-I-42: Each measure SHALL be represented with act. + CONF-QRDA-I-43: For each act in the Measure section, the value for act/@classCode + in a measure act SHALL be ACT 2.16.840.1.113883.5.6 ActClass STATIC. + CONF-QRDA-I-44: For each act in the Measure section the act/@moodCode in a + measure act SHALL be DEF 2.16.840.1.113883.5.1001 ActMood STATIC. + + + + + + + + Error: CONF-QRDA-I-45: For each act in the Measure section there SHALL be an act/code + reflecting the measure name and version. + + + + + + + + Error: CONF-QRDA-I-24: The Measure Set section SHALL contain one nested Measure section + and SHALL NOT contain more than one nested Measure section. + + + Error: CONF-QRDA-I-26: The Measure Set section SHALL contain a templateId uniquely + identifying the Measure Set name and version. + + + Error: CONF-QRDA-I-29: The Measure Set section SHALL be valued with section/title with a + case-insensitive, text string containing "Measure set: <measure set + name>". + + + Error: CONF-QRDA-I-31: The nested Measure section SHALL contain at least one measure that + belongs to the measure set. + + + + + + + + Error: CONF-QRDA-I-49: The Reporting Parameters section SHALL be valued with + section/title with a case-insensitive, text string containing "Reporting + Parameters". + + + Error: CONF-QRDA-I-50: The Reporting Parameters section SHALL contain exactly one + Observation Parameters Act, represented as an act. + CONF-QRDA-I-51: The value for act/@classCode in an Observation Parameters Act + SHALL be ACT 2.16.840.1.113883.5.6 ActClass STATIC. + CONF-QRDA-I-52: The value for act/@moodCode in an Observation Parameters Act + SHALL be EVN 2.16.840.1.113883.5.1001 ActMood STATIC. + CONF-QRDA-I-53: The value for act/code SHALL be 252116004 Observation + Parameters 2.16.840.1.113883.6.96 SNOMED-CT STATIC. + + + Error: CONF-QRDA-I-54: The reporting time period SHALL be represented with an + effectiveTime/low element combined with a high element representing + respectively the first and last days of the period reported. + + + + + + + + Error: CONF-QRDA-I-57: The Patient Data section SHALL be valued with section/title with a + case-insensitive, text string containing "Patient Data". + + + + + + + + HL7 QRDA Category I Header (Section 2) - warning validation phase + + + Warning: CONF-QRDA-I-14: A QRDA Category I report SHOULD contain exactly one + legalAuthenticator element. + + + + + + HL7 QRDA Category I Header (Section 2) - note validation phase + + + Note: CONF-QRDA-I-21: A QRDA Category I report ... MAY contain + more than one non-nested top-level Measure section each containing + information about a single measure. + + + Note: CONF-QRDA-I-23: A QRDA Category I report MAY contain one or more Measure Set + sections. + + + Note: CONF-QRDA-I-25: A QRDA Category I report MAY contain both Measure Set sections and + individual top-level Measure sections. + + + + + + + + + + Note: CONF-QRDA-I-41: The Measure section MAY contain a section/text element for the + description of the measure(s). + + + + + + + + Note: CONF-QRDA-I-46: Each measure act MAY contain an act/text element containing a + description of the measure. + + + + + + + + Note: CONF-QRDA-I-30: The Measure Set section MAY contain a section/text element for + the description of the measure set or MAY contain a formal representation of + a description of the measure set. + + + + Index: /qrda/schematron/templates/qrda_bmi.ent =================================================================== --- /qrda/schematron/templates/qrda_bmi.ent (revision 906) +++ /qrda/schematron/templates/qrda_bmi.ent (revision 906) @@ -0,0 +1,264 @@ + + + + + HL7 QRDA BMI (Section 6) - errors validation phase + + + + Error: CONF-QRDA_BMI-1: Category I BMI QRDA report SHALL contain exactly one + ClinicalDocument/recordTarget/patientRole/patient/birthTime. + + + + Error: CONF-QRDA_BMI-2: The birthTime SHALL be precise to the day and MAY be precise to + the second. + + + + Error: CONF-QRDA_BMI-3: A Body Mass Index QRDA SHALL contain a non-nested top-level + Measure section containing information about the Body Mass Index + measure. + + + + + + Error: CONF-QRDA_BMI-5: The Body Mass Index Measure section SHALL contain exactly one + section/title valued with a case-insensitive, text string containing, + "Measure: Body Mass Index Percentile". + + + + Error: CONF-QRDA_BMI-6: The value for act/code SHALL be BMIV1-X Body Mass Index, + V1 2.16.840.1.113883.6.1 LOINC STATIC. + + + + + + + + Error: CONF-QRDA_BMI-8: The reporting time period in a Reporting Period Observation SHALL + be represented with an effectiveTime/low element with a value of the first + day of the month combined with a high element with a value of the last day + of the month OR the reporting time period in a Reporting Period Observation + SHALL be represented with an effectiveTime/low element with a value of + the first day of the quarter combined with a high element with a value of + the last day of the quarter representing respectively the first and last days of + the period reported. + + + + + + + Error: CONF-QRDA_BMI-9: The Body Mass Index QRDA Patient Data Section encounter + information SHALL be represented with encounter. + + + Error: CONF-QRDA_BMI-11: The value for encounter/@classCode in an Encounter activity + SHALL be ENC 2.16.840.1.113883.5.6 ActClass STATIC. + + + Error: CONF-QRDA_BMI-12: The value for encounter/@moodCode in an Encounter activity + SHALL be EVN 2.16.840.1.113883.5.1001 ActMood STATIC. + + + Error: CONF-QRDA_BMI-14: An Encounter activity SHALL contain exactly one encounter/code. + + + Error: CONF-QRDA_BMI-15: The value for encounter/code in the Encounter activity SHALL be + selected from Value Set BMIPhysicalEncounter 2.16.840.1.113883.11.20.2.1 STATIC 20090215. + + + Error: CONF-QRDA_BMI-16: An Encounter activity SHALL contain exactly one + encounter/effectiveTime to indicate date and time of the encounter. + + + Error: CONF-QRDA_BMI-17: The encounter/effectiveTime SHALL be accurate to the day. + + + Error: CONF-QRDA_BMI-18: The Encounter activity SHALL contain exactly one + entryRelationship where the value of @typeCode SHALL be COMP, whose + target act is a principal diagnosis organizer (as described in Section 6.6.3.2 + Clinical Statement Conformance Principle Diagnosis). + + + + + + + + + Error: CONF-QRDA_BMI-36: A Body Mass Index Percentile Observation SHALL contain exactly + one observation/statusCode. + + + Error: CONF-QRDA_BMI-37: The value of observation/statusCode SHALL be completed. + + + Error: CONF-QRDA_BMI-38: A Body Mass Index Percentile Observation SHALL contain exactly + one observation/effectiveTime, which represents the time the percentile + was measured. + + + Error: CONF-QRDA_BMI-39: The observation/effective Time SHALL be accurate to the day + and MAY be accurate to the second. + + + Error: CONF-QRDA_BMI-40: A Body Mass Percentile Observation SHALL contain exactly one + observation/code where the value is TempSNOMEDcode 1111111 Body Mass + Percentile 2.16.840.1.113883.6.96 SNOMED-CT STATIC. + + + Error: CONF-QRDA_BMI-41: The value for value/xsi:type SHALL be PQ. + + + Error: CONF-QRDA_BMI-42: The observation/value SHALL be expressed using a valid UCUM + Physical Quantity Unit = "%" (percent). + + + + + + + + Error: CONF-QRDA_BMI-20: The value for organizer/@classCode in a Principle Diagnosis + Organizer SHALL be CLUSTER 2.16.840.1.113883.5.6 ActClass STATIC. + + + Error: CONF-QRDA_BMI-21: The value for organizer/@moodCode in a Principle Diagnosis + Organizer SHALL be EVN 2.16.840.1.113883.5.1001 ActMood STATIC. + + + Error: CONF-QRDA_BMI-22: The value for organizer/code SHALL be 8319008 Principle + diagnosis 2.16.840.1.113883.6.96 SNOMED-CT STATIC. + + + Error: CONF-QRDA_BMI-23: A Principle Diagnosis Organizer SHALL contain exactly one + organizer/statusCode. + + + Error: CONF-QRDA_BMI-24: The value for organizer/statusCode in a Principle Diagnosis + Organizer SHALL be completed 2.16.840.1.113883.5.14 ActStatus STATIC. + + + Error: CONF-QRDA_BMI-25: A Principle Diagnosis Organizer SHALL contain one or more + organizer/component. + + + Error: CONF-QRDA_BMI-26: The target of the Principle Diagnosis Organizer + organizer/component relationship SHALL be a Principle Diagnosis + Observation. + CONF-QRDA_BMI-27: The Principle Diagnosis Observation SHALL be represented with an + observation element where the value of @classCode is OBS and the value + of @moodCode is EVN. + CONF-QRDA_BMI-28: The value for code/@code SHALL be ASSERTION and + code/@codeSystem SHALL be 2.16.840.1.113883.5.4 HL7 ActCode + Complete STATIC. + + + + + + + Error: CONF-QRDA_BMI-29: A statusCode element SHALL be present where the value of @code + is completed. + + + Error: CONF-QRDA_BMI-30: The value for value/@xsi:type SHALL be CD. + + + + + Error: CONF-QRDA_BMI-31: The value for value/@code shall be "102506008" (Well Child), from + codeSystem 2.16.840.1.113883.6.96 (SNOMED-CT). + + + + + + + + HL7 QRDA BMI (Section 6) - warning validation phase + + + + Warning: CONF-QRDA_BMI-13: An Encounter activity SHOULD contain at least one encounter/id. + + + Warning: CONF-QRDA_BMI-35: A Body Mass Index Percentile Observation SHOULD contain at + least one observation/id. + + + + + + + Warning: CONF-QRDA_BMI-32: The Body Mass Index Percentile QRDA Patient Data section SHOULD + contain exactly one Body Mass Index Percentile Observation. + + + + + + + HL7 QRDA BMI (Section 6) - note validation phase + + + + Note: CONF-QRDA_BMI-2: The birthTime [...] MAY be precise to the second. + + + + + + Note: CONF-QRDA_BMI-7: The value for act/text element MAY contain a case-insensitive, + text string containing the description of the measure, "Children ages 2-18 + who had an encounter in the measurement period AND whose + weight was classified based on CDC BMI percentile for age and + gender." + + + + + + Note: CONF-QRDA_BMI-17: The encounter/effectiveTime ... MAY be accurate to the second. + + + Note: CONF-QRDA_BMI-39: The observation/effective Time ... MAY be accurate to the second. + + + + +