English	French	Notes	Complete/Exclude
Print/Reprint Reports Selection:			
Date Range Selection:			
  Beginning DATE/TIME of Initial Print : 			
  Ending    DATE/TIME of Initial Print : 			
Report   : 			
Report Selection: 			
Printed/Unprinted Report Selection			
Unprinted			
 Reports by 			
 BY PRINT DATE]			
RA DIST I-TYPE			
There are no Unverified Reports.			
Enter 'b' for a brief format, 'd' for a detailed format, 			
'e' for a format sorted by exam date, 's' for a format			
sorted by Primary Interpreting Staff.			
This is mandatory.			
EXAM REGISTERED			
REPORT ENTERED			
(The date range refers to DATE 			
Default cut-off limits (in hours) for aging of reports are :			
Do you want to enter different cut-off limits			
Enter  Y  only if you want to change the above limits			
This is optional			
Enter number of hours as the cut-off limit			
 cutoff hours			
Try again 			
RACUT*			
Other Att/Res: 			
>>>>> Unverified Reports (			
Report Date Range:			
Division Summary			
Total Unverified Reports: 			
*  No Unverified Reports  *			
Transcrip: 			
PROB/DRAFT			
Pre-ver: 			
Order Date Desired: 			
Hours (age of report)			
UNVERIFIED IMAGING REPORTS BY PRIMARY INTERPRETING STAFF			
UNVERIFIED IMAGING REPORTS BY DIVISION			
*** No Unverified Reports ***			
*** No Unverified Reports for division: 			
Primary Interpreting Staff: 			
Pri. Int'g Staff			
*** No Unverified Reports for division ***			
This option is only available for Rad/Nuc Med Interpreting Physicians.			
Select Interpreting Physician: 			
You have			
Interpreting Physician 			
 no Unverified Reports.			
continue^continue normal processing			
 left to review) 			
(No more 			
(ALL gone) 			
Type '?' for action list, 'Enter' to 			
another user has deleted this report for			
another user has changed this report's status to '			
Press return key to continue 			
Ex Date			
Please enter a single number, individual numbers separated by commas,			
a range of numbers separated by a dash, or numbers separated by a			
combination of commas and dashes.			
Sorry, there are no Pre-Verified reports to review.			
Sorry, there are no 			
 reports to review.			
     1  PRE-VERIFIED (STATUS=DRAFT or RELEASED/NOT VERIFIED)  (			
     2  RELEASED/NOT VERIFIED                                 (			
     4  PROBLEM DRAFT                                         (			
     7  STAT (STATUS MAY BE ANY OF ABOVE)                     (			
Category of Reports to Verify: 			
There is only one report (			
) to choose from.			
Do you wish to review this one report			
Sorry, there are no STAT ordered reports to review.			
 additional exam			
 now ready for verification.			
Return to Resident (delete pre-verification)			
If you answer NO, this report will remain pre-verified.			
If you answer YES, this report will no longer be marked as pre-verifed.			
It will reappear as a selection in the Resident On-Line Pre-Verification			
option for the Resident associated with this report.			
' has an inactive provider 			
Another one (Select/De-Select): 			
RAD0)			
RAD0,0)			
in front of it, e.g.,  -			
S type ALL.			
Use an asterisk (*) to do a wildcard selection, e.g.,			
* to select all entries that begin			
with the text '			
'.  Wildcard selection is			
case sensitive.			
RAEXTRN(			
   <Signature Failed> 			
Do you want to see a 'help' message on printer assignment			
Enter 'Yes' to see the help message, or 'No' not to.			
Select Imaging Location: 			
Select Radiology AMIS codes for Radiology imaging type procedures,			
Nuclear Medicine AMIS codes for Nuclear Medicine procedures			
Default Printer Assignments:			
There are six imaging location parameters that the coordinator will			
not be able to enter.  They are the default printers; specifically,the			
default flash card/exam label, jacket label, request, request cancellation,			
radiopharmaceutical dosage ticket, and report printers.  Once you have			
assigned these printer names to a location, the module will automatically			
route output to the appropriate printer without having to ask the user.			
NOTE:  If you have more than one imaging location within an imaging type			
the Division parameter 'Ask Imaging Location' must be set to 'yes' in			
order to print cancelled requests on the request cancellation printer.			
RA REQ-LOC			
No 'STATUS #1' in the status file			
No 'COMPLETE' status in the status file			
RA(1)			
RAIMAGE(0)			
Case # being tracked: 			
Invalid status for case #: 			
Exam is already complete!!			
Enter Next Status: 			
Status has already been set to 			
You are not authorized to change to this status			
Default Next Status (			
There is no valid higher status to advance to.			
Press Return key to continue 			
Next valid status is : 			
Case #  : 			
   ***** Old Status: 			
   ***** New Status: 			
This record is corrupted -- the procedure is missing,			
please contact your ADPAC or IRM			
Do you wish to continue? YES// 			
Answer 'Yes' or 'No'.			
backed down			
successfully changed			
 for case #: 			
No data have been entered for 			
The selected case belongs to a print set,			
Please use the 'Report Enter/Edit' option			
to enter data for 			
Your access to Imaging Locations is nonexistent.			
Contact your ADPAC for further assistance.			
Current Division: 			
Select the Location(s) you wish to track: 			
No incomplete statuses on file			
Exam Status Tracking Module			
Date    : 			
Status  : 			
Locations: 			
Equip/Rm			
Case #, 			
Status, (N)ext status			
, '^' to Stop: 			
a case number  OR			
Multiple case #'s separated by commas  OR			
The name of another status  OR			
'N' to get the screen containing the next status			
'C' to continue with the next screen of patients for this status			
Status 			
 not selected.			
No data exists for status 			
Last status - Do you want to start over? YES// 			
 entered for this exam.			
Error: cannot determine Imaging Type of exam.  Contact IRM.			
You do not have the proper access privileges to 			
change this exam to this status			
 ...exam status not changed			
 ...exam status backed down to '			
 ...though upgraded, new status level (			
is not as high as the desired level (			
This case also qualifies for higher status(es) :			
Since Status Tracking can only upgrade one status at a time,			
please edit this exam again.			
interpreting staff or resident			
detailed procedure			
detailed procedure (no CPT code)			
film data			
diagnostic code			
report verification			
procedure modifier			
CPT modifiers			
ERROR:  Cannot determine imaging type of exam!			
This exam meets the requirements for the following statuses:			
Does not meet the requirements of any status.			
' status and cannot be 'CANCELLED'			
A report has been filed for this case.  Therefore cancellation is not allowed !			
Radiopharmaceutical			
Radiopharmaceutical: 			
Activity Drawn			
Date/Time Drawn			
Person Who Measured Dose			
Date/Time Dose Administered			
Person Who Administered Dose			
Route Of Administration			
Site Of Administration			
Lot No.			
This dose requires a written, dated and signed directive by			
Are you sure (Y/N)?: N//			
Enter 'Yes' if this value is acceptable, or 'No' if this field is to be			
Overall:			
Total number of exams moved to a status of COMPLETE			
for period  			
** Status Tracking Statistics Report **			
Division Summary Procedure Detail			
Minimum			
Procedure (CPT)			
Division Summary Overall			
There are no statistics for this Division and Imaging Type combination.			
Procedure Detail by Requesting Location			
Division Summary Requesting Location Details			
(Only requesting locations with data are included)			
Requesting Location:			
ALL SELECTED			
There are no statistics for following selected requesting locations:			
Select all requesting locations? Y/N: 			
  Timed out....			
Enter YES to obtain a report for all requesting locations.^Enter NO to select one or more requesting location(s).			
Select requesting location: 			
Select all procedures? Y/N: 			
Enter YES to select all procedures^or NO to select a single procedure.			
Answer with either: YES or NO			
Do you wish to print detailed reports? No// 			
Enter YES to obtain detailed reports 'Procedure Detail by Requesting locations'^and 'Division Summary Requesting Location Details '.^Enter NO to skip the reports.			
 *   Since you have added a new Imaging Location, remember to assign     * 			
 *   it to a Rad/Nuc Med division through Division Parameter Set-up.     * 			
Do you wish to include inactive Imaging Locations			
Enter 'Yes' if inactive Imaging Locations are to be			
included, 'No' if only active locations are desired.			
Rad/Nuc Med Imaging Location Parameter List			
Select Camera/Equip/Room: 			
Select a Rad/Nuc Med Division: 			
Imaging Location file #79.1 internal entry #			
is a broken pointer to Hospital Location file #44.			
IRM must resolve this problem, then the Rad/Nuc Med ADPAC			
should use the Location Parameter Set-up [RA SYSLOC] option			
to edit this Imaging Location, and the Division Parameter			
Set-up [RA SYSDIV] option to assign it to a division.			
Imaging Location file #79.1 entry 			
or invalid DSS ID.  The Radiology/Nuclear Medicine ADPAC should			
use the Location Parameter Set-up [RA SYSLOC] option to enter			
a valid imaging DSS Code for this imaging location.			
 is not assigned			
to a Rad/Nuc Med Division. If Imaging exams are to be registered			
in this imaging location, or if there are incomplete exams			
already registered to this location, the Radiology/Nuclear			
Med ADPAC should use the Division Parameter Set-up [RA SYSDIV]			
option to assign this imaging location to the appropriate			
Rad/Nuc Med Division.			
Scheduling routine could not reset Hospital Location			
file #44 params for Imaging Location 			
to agree with params on the Imaging Location file #79.1.			
IRM should investigate the cause of this Scheduling error message:			
Imaging Location 			
 has appointment patterns, and			
cannot be 'pointed to' from a file 79.1 Imaging Location.			
 has been 're-pointed' to			
Hospital Location 			
 is OK.			
>>> IMAGING TRANSCRIPTIONIST WORKLOAD REPORT <<<			
Rad/Nuc Med TRANSCRIPT RPT			
>>> IMAGING TRANSCRIPTION REPORT <<<			
# of Transcriptionists selected: 			
RADIOLOGY/NUCLEAR MEDICINE PERSONNEL			
NUMBER OF LINES			
NUMBER OF REPORTS			
In this division there were no reports found for the transcriptionists selected.			
Rad/Nuc Med 			
You must select a printer for this output.			
Must be a user with the appropriate privileges to continue!			
The following is a list of possible devices. You must choose			
one of these by entering in the device's full name.			
NOTE: This field is not a pointer field to file 3.5!			
Device Name:			
Device Location:			
 to stop)			
Sorry, that's not your access code.  Try again.			
Enter your access code or an uparrow to exit.			
YOU ARE NOT IN THE 'NEW PERSON' FILE. CONTACT YOUR IRM SERVICE			
Since you have changed the procedure,			
will now be deleted.			
You have changed the procedure, but there are			
no data for Radiopharmaceuticals and Meds to delete.			
Rad/Nuc Med UPDATE STATUS OF ONE REPORT			
Status update queued!			
Rad/Nuc Med UPDATE STATUSES OF MULTIPLE REPORTS			
Status updates queued!			
Attempting to credit a clinic stop.			
Clinic Stop credited.			
Unable to credit a clinic stop!			
Missing STOP CODE data			
No Principal Clinic entered for '			
RAD/NUC MED CREDIT STOP ERROR			
Abnormal 			
Imaging Results: 			
Amended/			
Amended 			
Can't continue --- No 'MINUTES' function found in File Manager			
Neg. Time			
Exam has been 'cancelled' therefore the status cannot be changed.			
...exam status remains '			
...will now designate exam status as '			
'... for case no. 			
...exam status 			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################