source: Scheduling/trunk/m/BSDXAPI1.m@ 1675

BSDXAPI1        ; VEN/SMH - SCHEDULING APIs - Continued!!! ; 7/9/12 2:22pm
        ;;1.7;BSDX;;Jun 01, 2013;Build 24
        ; Licensed under LGPL  
        ;
        ; Change History (BSDXAPI and BSDXAPI1)
        ; Pre 1.42:
        ; - Simplified entry points (MAKE1, CANCEL1, CHECKIN1)
        ; 2010-11-5: (1.42)
        ; - Fixed errors having to do uncanceling patient appointments if it was 
        ;   a patient cancelled appointment.
        ; - Use new style Fileman API for storing appointments in file 44 in 
        ;   $$MAKE due to problems with legacy API.
        ; 2010-11-12: (1.42)
        ; - Changed ="C" to ["C" in SCIEN. Cancelled appointments can be "PC" as 
        ;   well. 
        ; 2010-12-5 (1.42)
        ; Added an entry point to update the patient note in file 44.
        ; 2010-12-6 (1.42)
        ; MAKE1 incorrectly put info field in BSDR("INFO") rather than BSDR("OI")
        ; 2010-12-8 (1.42)
        ; Removed restriction on max appt length. Even though this restriction
        ; exists in fileman (120 minutes), PIMS ignores it. Therefore, I 
        ; will ignore it here too.
        ; 2011-01-25 (v.1.5)
        ; Added entry point $$RMCI to remove checked in appointments.
        ; In $$CANCEL, if the appointment is checked in, delete check-in rather than
        ;  spitting an error message to the user saying 'Delete the check-in'
        ; Changed all lines that look like this:
        ;  I $G(BSDR("ADT"))'?7N1".".4N Q 1_U_"Appt Date/Time error: "_$G(BSDR("ADT"))
        ; to:
        ;  I $G(BSDR("ADT"))'?7N.1".".4N Q 1_U_"Appt Date/Time error: "_$G(BSDR("ADT"))
        ; to allow for date at midnight which does not have a dot at the end.
        ; 2011-01-26 (v.1.5)
        ; More user friendly message if patient already has appointment in $$MAKE:
        ;  Spits out pt name and user friendly date.
        ; 2012-06-18 (v 1.7)
        ; Removing transacions. Means that code SHOULD NOT fail. Took all checks
        ;  out for making an appointment to MAKECK. We call this first to make sure
        ; that the appointment is okay to make before committing to make it. We
        ; still have the provision to delete the data though if we fail when we 
        ; actually make the appointment.
        ; CANCELCK exists for the same purpose.
        ; CHECKINK ditto
        ; New API: $$NOSHOW^BSDXAPI1 for no-showing patients
        ; Moved RMCI from BSDXAPI to BSDXAPI1 because BSDXAPI1 is getting larger
        ;  than 20000 characters.
        ; Added RMCICK (Remove check-in check)
        ; Moved Availability update EPs in BSDX07 and BSDX08 b/c they really
        ; belong to PIMS, not to the Scheduling GUI. $$MAKE and $$CANCEL now
        ; call the EPs here.
        ; Cancel and Remove-Check-in now check to see if the patient is checked-out
        ; If the patient is checked out, then we fail to cancel/no-show.
        ; UPDATENOTE was renamed to UPDATENT and moved to BSDXAPI1.
        ;
NOSHOW(PAT,CLINIC,DATE,NSFLAG)  ; $$ PEP; No-show Patient at appt date (new in v1.7)
        ; PAT = DFN
        ; CLINIC = SC IEN
        ; DATE = FM Date/Time of Appointment
        ; NSFLAG = truthy value to add no-show, or falsy to remove (use 1 or 0 pls!)
        ; 1^error for failure, 0 for success
        ; Code follows EN1^SDN
        ;
        ; Check for failure conditions first before doing this. No globals set here
        N NOSHOWCK S NOSHOWCK=$$NOSHOWCK(PAT,CLINIC,DATE,NSFLAG)
        I NOSHOWCK Q NOSHOWCK
        ;
        ; Set up Protocol Driver
        N SDNSHDL,SDDA S SDNSHDL=$$HANDLE^SDAMEVT(1) S SDDA=$$SCIEN^BSDXAPI(PAT,CLINIC,DATE)
        N SDATA
        D BEFORE^SDAMEVT(.SDATA,PAT,DATE,CLINIC,SDDA,SDNSHDL) ; Only ^TMP set here.
        ;
        ; Simulated Errors
        Q:$D(BSDXSIMERR2) 1_U_"Simulated Error"
        ;
        ; Edit the ^DPT( "S" node entry - Noshow or undo noshow
        ; Failure analysis: if we fail here, we presume no change happened in 
        ; ^DPT(DA,"S", and so we just have to roll back ^BSDXAPPT
        N BSDXIENS S BSDXIENS=DATE_","_PAT_","
        N BSDXFDA
        I +NSFLAG D
        . S BSDXFDA(2.98,BSDXIENS,3)="N"
        . S BSDXFDA(2.98,BSDXIENS,14)=DUZ
        . S BSDXFDA(2.98,BSDXIENS,15)=$$NOW^XLFDT()
        E  D
        . S BSDXFDA(2.98,BSDXIENS,3)="@"
        . S BSDXFDA(2.98,BSDXIENS,14)="@"
        . S BSDXFDA(2.98,BSDXIENS,15)="@"
        N BSDXMSG
        D FILE^DIE("","BSDXFDA","BSDXMSG")
        Q:$D(BSDXMSG) 1_U_"Fileman edit to DPT error: Patient="_PAT_" Appt="_DATE_" Error="_BSDXMSG("DIERR",1,"TEXT",1)
        ; 
        ; This M error trigger tests if ^BSDXAPPT rolls back. 
        ; I won't try to roll back ^DPT(,"S" because
        ; the M error is caused here, so if I try to rollback, I can cause another
        ; error. Infinite Errors then.
        I $D(BSDXSIMERR3) N X S X=1/0
        ;
        ; Run the event driver
        D NOSHOW^SDAMEVT(.SDATA,PAT,DATE,CLINIC,SDDA,0,SDNSHDL)
        Q 0
        ;
NOSHOWCK(PAT,CLINIC,DATE,NSFLAG)        ; $$ PEP; No-show Check
        ; TODO: Not all appointments can be no showed.
        ; Check the code in SDAMN 
        ; S SDSTB=$$STATUS^SDAM1(DFN,SDT,SDCL,$G(^DPT(DFN,"S",SDT,0))) ; before status  
        ; Q:'$$CHK ; Checks $D(^SD(409.63,"ANS",1,+SDSTB))
        QUIT 0
        ;
RMCI(PAT,CLINIC,DATE)    ;PEP; -- Remove Check-in; $$
        ; PAT = DFN
        ; CLINIC = SC IEN
        ; DATE = FM Date/Time of Appointment
        ;
        ; Returns:
        ; 0 if okay
        ; -1 if failure
        ;
        ; Call like this: $$RMCI(233,33,3110102.1130)
        ;
        ; Check to see if we can remove the check-in
        N BSDXERR S BSDXERR=$$RMCICK(PAT,CLINIC,DATE)
        I BSDXERR Q BSDXERR
        ;
        ; Move my variables into the ones used by SDAPIs (just a convenience)
        NEW SDATA,DFN,SDT,SDCL,SDDA,SDCIHDL,SDMODE
        S DFN=PAT,SDT=DATE,SDCL=CLINIC,SDMODE=2,SDDA=$$SCIEN^BSDXAPI(DFN,SDCL,SDT)
        ;
        I SDDA<1 QUIT 0    ; Appt cancelled; cancelled appts rm'ed from file 44
        ;
        ; remember before status
        S SDCIHDL=$$HANDLE^SDAMEVT(1),SDATA=SDDA_U_DFN_U_SDT_U_SDCL
        D BEFORE^SDAMEVT(.SDATA,DFN,SDT,SDCL,SDDA,SDCIHDL)
        ;
        ; M Error Test - Simulate behavior when an M error occurs
        I $G(BSDXDIE2) N X S X=1/0
        ; 
        ; Simulate a failure to file the data in Fileman
        I $D(BSDXSIMERR3) Q 1_U_"Simulated Error"
        ;
        ; remove check-in using filer.
        N BSDXIENS S BSDXIENS=SDDA_","_DATE_","_CLINIC_","
        N BSDXFDA
        S BSDXFDA(44.003,BSDXIENS,309)="@" ; CHECKED-IN
        S BSDXFDA(44.003,BSDXIENS,302)="@" ; CHECK IN USER
        S BSDXFDA(44.003,BSDXIENS,305)="@" ; CHECK IN ENTERED
        N BSDXERR
        D FILE^DIE("","BSDXFDA","BSDXERR")
        I $D(BSDXERR) QUIT "-1~Can't file for Pat "_PAT_" in Clinic "_CLINIC_" at "_DATE_". Fileman reported an error: "_BSDXERR("DIERR",1,"TEXT",1)
        ;
        ; set after status
        ; S SDDA=$$SCIEN(DFN,SDCL,SDT) ;smh -why is this here? SDDA won't change.
        S SDCIHDL=$$HANDLE^SDAMEVT(1),SDATA=SDDA_U_DFN_U_SDT_U_SDCL
        D AFTER^SDAMEVT(.SDATA,DFN,SDT,SDCL,SDDA,SDCIHDL)
        ;
        ; call event driver
        D EVT^SDAMEVT(.SDATA,4,SDMODE,SDCIHDL)
        QUIT 0
        ;
RMCICK(PAT,CLINIC,DATE) ;PEP; Can you remove a check-in for this patient?
        ; PAT - DFN by value
        ; CLINIC - ^SC ien by value
        ; DATE - Appointment Date
        ; Output: 0 if okay or 1 if error
        ;
        ; Error for Unit Tests
        I $G(BSDXSIMERR2) Q 1_U_"Simulated Error"
        ;
        ; Get appointment IEN in ^SC(DA(2),"S",DA(1),1,
        N SCIEN S SCIEN=$$SCIEN^BSDXAPI(PAT,CLINIC,DATE)
        ;
        ; If not there, it has been cancelled. Okay to Remove Check-in.
        I 'SCIEN QUIT 0
        ;
        ; Check if checked out
        I $$CO^BSDXAPI(PAT,CLINIC,DATE,SCIEN) Q 1_U_"Appointment Already Checked Out"
        ;
        QUIT 0
        ;
UPDATENT(PAT,CLINIC,DATE,NOTE)  ; PEP; Update Note in ^SC for patient's appointment @ DATE
        ; PAT = DFN
        ; CLINIC = SC IEN
        ; DATE = FM Date/Time of Appointment
        ;
        ; Returns:
        ; 0 if okay
        ; -1 if failure
        ;
        ; ERROR SIMULATION
        I $G(BSDXSIMERR1) QUIT "-1~Simulated Error"
        ;
        N SCIEN S SCIEN=$$SCIEN^BSDXAPI(PAT,CLINIC,DATE) ; ien of appt in ^SC
        I SCIEN<1 QUIT 0    ; Appt cancelled; cancelled appts rm'ed from file 44
        N BSDXIENS S BSDXIENS=SCIEN_","_DATE_","_CLINIC_","
        N BSDXFDA S BSDXFDA(44.003,BSDXIENS,3)=$E(NOTE,1,150)
        N BSDXERR
        D FILE^DIE("","BSDXFDA","BSDXERR")
        I $D(BSDXERR) QUIT "-1~Can't file for Pat "_PAT_" in Clinic "_CLINIC_" at "_DATE_". Fileman reported an error: "_BSDXERR("DIERR",1,"TEXT",1)
        QUIT 0
        ;
AVUPDTCN(BSDXSCD,BSDXSTART,BSDXLEN)     ;Update PIMS Clinic availability for cancel
        ; NB: VEN/SMH: This code has never been tested. It's here for its
        ; presumptive function, but I don't know whether it works accurately!
        ;See SDCNP0
        N SD,S  ; Start Date
        S (SD,S)=BSDXSTART
        N I ; Clinic IEN in 44
        S I=BSDXSCD
        ; if day has no schedule in legacy PIMS, forget about this update.
        Q:'$D(^SC(I,"ST",SD\1,1))
        N SL ; Clinic characteristics node (length of appt, when appts start etc)
        S SL=^SC(I,"SL")
        N X ; Hour Clinic Display Begins
        S X=$P(SL,U,3)
        N STARTDAY ; When does the day start?
        S STARTDAY=$S($L(X):X,1:8) ; If defined, use it; otherwise, 8am
        N SB ; ?? Who knows? Day Start - 1 divided by 100.
        S SB=STARTDAY-1/100
        S X=$P(SL,U,6) ; Now X is Display increments per hour
        N HSI ; Slots per hour, try 1
        S HSI=$S(X:X,1:4) ; if defined, use it; otherwise, 4
        N SI ; Slots per hour, try 2
        S SI=$S(X="":4,X<3:4,X:X,1:4) ; If slots "", or less than 3, then 4
        N STR ; ??
        S STR="#@!$* XXWVUTSRQPONMLKJIHGFEDCBA0123456789jklmnopqrstuvwxyz"
        N SDDIF ; Slots per hour diff??
        S SDDIF=$S(HSI<3:8/HSI,1:2)
        S SL=BSDXLEN ; Dammit, reusing variable; SL now Appt Length from GUI
        S S=^SC(I,"ST",SD\1,1) ; reusing var again; S now Day Pattern from PIMS
        N Y ; Hours since start of Date
        S Y=SD#1-SB*100 ;SD#1=FM Time portion; -SB minus start of day; conv to hrs
        N ST  ; ??
        ; Y#1 -> Minutes; *SI -> * Slots per hour; \.6 trunc min to hour
        ; Y\1 -> Hours since start of day; * SI: * slots
        S ST=Y#1*SI\.6+(Y\1*SI)
        N SS ; how many slots are supposed to be taken by appointment
        S SS=SL*HSI/60 ; (nb: try SL: 30 min; HSI: 4 slots)
        N I
        I Y'<1 D  ; If Hours since start of Date is greater than 1
        . ; loop through pattern. Tired of documenting.
        . F I=ST+ST:SDDIF D  Q:Y=""  Q:SS'>0
        . . S Y=$E(STR,$F(STR,$E(S,I+1))) Q:Y=""
        . . S S=$E(S,1,I)_Y_$E(S,I+2,999)
        . . S SS=SS-1
        . . Q:SS'>0
        S ^SC(BSDXSCD,"ST",SD\1,1)=S  ; new pattern; global set
        Q
        ;
AVUPDTMK(BSDXSCD,BSDXSTART,BSDXLEN,BSDXPATID)   ; Update RPMS Clinic availability for Make
        ;SEE SDM1
        N Y,DFN
        N SL,STARTDAY,X,SC,SB,HSI,SI,STR,SDDIF,SDMAX,SDDATE,SDDMAX,SDSDATE,CCXN,MXOK,COV,SDPROG
        N X1,SDEDT,X2,SD,SM,SS,S,SDLOCK,ST,I
        S Y=BSDXSCD,DFN=BSDXPATID
        S SL=$G(^SC(+Y,"SL")),X=$P(SL,U,3),STARTDAY=$S($L(X):X,1:8),SC=Y,SB=STARTDAY-1/100,X=$P(SL,U,6),HSI=$S(X=1:X,X:X,1:4),SI=$S(X="":4,X<3:4,X:X,1:4),STR="#@!$* XXWVUTSRQPONMLKJIHGFEDCBA0123456789jklmnopqrstuvwxyz",SDDIF=$S(HSI<3:8/HSI,1:2) K Y
        ;Determine maximum days for scheduling
        S SDMAX(1)=$P($G(^SC(+SC,"SDP")),U,2) S:'SDMAX(1) SDMAX(1)=365
        S (SDMAX,SDDMAX)=$$FMADD^XLFDT(DT,SDMAX(1))
        S SDDATE=BSDXSTART
        S SDSDATE=SDDATE,SDDATE=SDDATE\1
1       ;L  Q:$D(SDXXX)  S CCXN=0 K MXOK,COV,SDPROT Q:DFN<0  S SC=+SC
        Q:$D(SDXXX)  S CCXN=0 K MXOK,COV,SDPROT Q:DFN<0  S SC=+SC
        S X1=DT,SDEDT=365 S:$D(^SC(SC,"SDP")) SDEDT=$P(^SC(SC,"SDP"),"^",2)
        S X2=SDEDT D C^%DTC S SDEDT=X
        S Y=BSDXSTART
EN1     S (X,SD)=Y,SM=0 D DOW
S       I '$D(^SC(SC,"ST",$P(SD,"."),1)) S SS=+$O(^SC(+SC,"T"_Y,SD)) Q:SS'>0  Q:^(SS,1)=""  S ^SC(+SC,"ST",$P(SD,"."),1)=$E($P($T(DAY),U,Y+2),1,2)_" "_$E(SD,6,7)_$J("",SI+SI-6)_^(1),^(0)=$P(SD,".")
        S S=BSDXLEN
        ;Check if BSDXLEN evenly divisible by appointment length
        S RPMSL=$P(SL,U)
        I BSDXLEN<RPMSL S BSDXLEN=RPMSL
        I BSDXLEN#RPMSL'=0 D
        . S BSDXINC=BSDXLEN\RPMSL
        . S BSDXINC=BSDXINC+1
        . S BSDXLEN=RPMSL*BSDXINC
        S SL=S_U_$P(SL,U,2,99)
SC      S SDLOCK=$S('$D(SDLOCK):1,1:SDLOCK+1) Q:SDLOCK>9
        L +^SC(SC,"ST",$P(SD,"."),1):5 G:'$T SC
        S SDLOCK=0,S=^SC(SC,"ST",$P(SD,"."),1)
        S I=SD#1-SB*100,ST=I#1*SI\.6+($P(I,".")*SI),SS=SL*HSI/60*SDDIF+ST+ST
        I (I<1!'$F(S,"["))&(S'["CAN") L -^SC(SC,"ST",$P(SD,"."),1) Q
        I SM<7 S %=$F(S,"[",SS-1) S:'%!($P(SL,"^",6)<3) %=999 I $F(S,"]",SS)'<%!(SDDIF=2&$E(S,ST+ST+1,SS-1)["[") S SM=7
        ;
SP      I ST+ST>$L(S),$L(S)<80 S S=S_" " G SP
        S SDNOT=1
        S ABORT=0
        F I=ST+ST:SDDIF:SS-SDDIF D  Q:ABORT
        . S ST=$E(S,I+1) S:ST="" ST=" "
        . S Y=$E(STR,$F(STR,ST)-2)
        . I S["CAN"!(ST="X"&($D(^SC(+SC,"ST",$P(SD,"."),"CAN")))) S ABORT=1 Q
        . I Y="" S ABORT=1 Q
        . S:Y'?1NL&(SM<6) SM=6 S ST=$E(S,I+2,999) S:ST="" ST=" " S S=$E(S,1,I)_Y_ST
        . Q
        S ^SC(SC,"ST",$P(SD,"."),1)=S
        L -^SC(SC,"ST",$P(SD,"."),1)
        Q
DAY     ;;^SUN^MON^TUES^WEDNES^THURS^FRI^SATUR
        ;
DOW     S %=$E(X,1,3),Y=$E(X,4,5),Y=Y>2&'(%#4)+$E("144025036146",Y)
        F %=%:-1:281 S Y=%#4=1+1+Y
        S Y=$E(X,6,7)+Y#7
        Q
        ;