source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0379.txt@ 604

Last change on this file since 604 was 604, checked in by George Lilly, 14 years ago

Internationalization

File size: 11.8 KB
Line 
1English French Notes Complete/Exclude
2Print/Reprint Reports Selection:
3Date Range Selection:
4 Beginning DATE/TIME of Initial Print :
5 Ending DATE/TIME of Initial Print :
6Report :
7Report Selection:
8Printed/Unprinted Report Selection
9Unprinted
10 Reports by
11 BY PRINT DATE]
12RA DIST I-TYPE
13There are no Unverified Reports.
14Enter 'b' for a brief format, 'd' for a detailed format,
15'e' for a format sorted by exam date, 's' for a format
16sorted by Primary Interpreting Staff.
17This is mandatory.
18EXAM REGISTERED
19REPORT ENTERED
20(The date range refers to DATE
21Default cut-off limits (in hours) for aging of reports are :
22Do you want to enter different cut-off limits
23Enter Y only if you want to change the above limits
24This is optional
25Enter number of hours as the cut-off limit
26 cutoff hours
27Try again
28RACUT*
29Other Att/Res:
30>>>>> Unverified Reports (
31Report Date Range:
32Division Summary
33Total Unverified Reports:
34* No Unverified Reports *
35Transcrip:
36PROB/DRAFT
37Pre-ver:
38Order Date Desired:
39Hours (age of report)
40UNVERIFIED IMAGING REPORTS BY PRIMARY INTERPRETING STAFF
41UNVERIFIED IMAGING REPORTS BY DIVISION
42*** No Unverified Reports ***
43*** No Unverified Reports for division:
44Primary Interpreting Staff:
45Pri. Int'g Staff
46*** No Unverified Reports for division ***
47This option is only available for Rad/Nuc Med Interpreting Physicians.
48Select Interpreting Physician:
49You have
50Interpreting Physician
51 no Unverified Reports.
52continue^continue normal processing
53 left to review)
54(No more
55(ALL gone)
56Type '?' for action list, 'Enter' to
57another user has deleted this report for
58another user has changed this report's status to '
59Press return key to continue
60Ex Date
61Please enter a single number, individual numbers separated by commas,
62a range of numbers separated by a dash, or numbers separated by a
63combination of commas and dashes.
64Sorry, there are no Pre-Verified reports to review.
65Sorry, there are no
66 reports to review.
67 1 PRE-VERIFIED (STATUS=DRAFT or RELEASED/NOT VERIFIED) (
68 2 RELEASED/NOT VERIFIED (
69 4 PROBLEM DRAFT (
70 7 STAT (STATUS MAY BE ANY OF ABOVE) (
71Category of Reports to Verify:
72There is only one report (
73) to choose from.
74Do you wish to review this one report
75Sorry, there are no STAT ordered reports to review.
76 additional exam
77 now ready for verification.
78Return to Resident (delete pre-verification)
79If you answer NO, this report will remain pre-verified.
80If you answer YES, this report will no longer be marked as pre-verifed.
81It will reappear as a selection in the Resident On-Line Pre-Verification
82option for the Resident associated with this report.
83' has an inactive provider
84Another one (Select/De-Select):
85RAD0)
86RAD0,0)
87in front of it, e.g., -
88S type ALL.
89Use an asterisk (*) to do a wildcard selection, e.g.,
90* to select all entries that begin
91with the text '
92'. Wildcard selection is
93case sensitive.
94RAEXTRN(
95 <Signature Failed>
96Do you want to see a 'help' message on printer assignment
97Enter 'Yes' to see the help message, or 'No' not to.
98Select Imaging Location:
99Select Radiology AMIS codes for Radiology imaging type procedures,
100Nuclear Medicine AMIS codes for Nuclear Medicine procedures
101Default Printer Assignments:
102There are six imaging location parameters that the coordinator will
103not be able to enter. They are the default printers; specifically,the
104default flash card/exam label, jacket label, request, request cancellation,
105radiopharmaceutical dosage ticket, and report printers. Once you have
106assigned these printer names to a location, the module will automatically
107route output to the appropriate printer without having to ask the user.
108NOTE: If you have more than one imaging location within an imaging type
109the Division parameter 'Ask Imaging Location' must be set to 'yes' in
110order to print cancelled requests on the request cancellation printer.
111RA REQ-LOC
112No 'STATUS #1' in the status file
113No 'COMPLETE' status in the status file
114RA(1)
115RAIMAGE(0)
116Case # being tracked:
117Invalid status for case #:
118Exam is already complete!!
119Enter Next Status:
120Status has already been set to
121You are not authorized to change to this status
122Default Next Status (
123There is no valid higher status to advance to.
124Press Return key to continue
125Next valid status is :
126Case # :
127 ***** Old Status:
128 ***** New Status:
129This record is corrupted -- the procedure is missing,
130please contact your ADPAC or IRM
131Do you wish to continue? YES//
132Answer 'Yes' or 'No'.
133backed down
134successfully changed
135 for case #:
136No data have been entered for
137The selected case belongs to a print set,
138Please use the 'Report Enter/Edit' option
139to enter data for
140Your access to Imaging Locations is nonexistent.
141Contact your ADPAC for further assistance.
142Current Division:
143Select the Location(s) you wish to track:
144No incomplete statuses on file
145Exam Status Tracking Module
146Date :
147Status :
148Locations:
149Equip/Rm
150Case #,
151Status, (N)ext status
152, '^' to Stop:
153a case number OR
154Multiple case #'s separated by commas OR
155The name of another status OR
156'N' to get the screen containing the next status
157'C' to continue with the next screen of patients for this status
158Status
159 not selected.
160No data exists for status
161Last status - Do you want to start over? YES//
162 entered for this exam.
163Error: cannot determine Imaging Type of exam. Contact IRM.
164You do not have the proper access privileges to
165change this exam to this status
166 ...exam status not changed
167 ...exam status backed down to '
168 ...though upgraded, new status level (
169is not as high as the desired level (
170This case also qualifies for higher status(es) :
171Since Status Tracking can only upgrade one status at a time,
172please edit this exam again.
173interpreting staff or resident
174detailed procedure
175detailed procedure (no CPT code)
176film data
177diagnostic code
178report verification
179procedure modifier
180CPT modifiers
181ERROR: Cannot determine imaging type of exam!
182This exam meets the requirements for the following statuses:
183Does not meet the requirements of any status.
184' status and cannot be 'CANCELLED'
185A report has been filed for this case. Therefore cancellation is not allowed !
186Radiopharmaceutical
187Radiopharmaceutical:
188Activity Drawn
189Date/Time Drawn
190Person Who Measured Dose
191Date/Time Dose Administered
192Person Who Administered Dose
193Route Of Administration
194Site Of Administration
195Lot No.
196This dose requires a written, dated and signed directive by
197Are you sure (Y/N)?: N//
198Enter 'Yes' if this value is acceptable, or 'No' if this field is to be
199Overall:
200Total number of exams moved to a status of COMPLETE
201for period
202** Status Tracking Statistics Report **
203Division Summary Procedure Detail
204Minimum
205Procedure (CPT)
206Division Summary Overall
207There are no statistics for this Division and Imaging Type combination.
208Procedure Detail by Requesting Location
209Division Summary Requesting Location Details
210(Only requesting locations with data are included)
211Requesting Location:
212ALL SELECTED
213There are no statistics for following selected requesting locations:
214Select all requesting locations? Y/N:
215 Timed out....
216Enter YES to obtain a report for all requesting locations.^Enter NO to select one or more requesting location(s).
217Select requesting location:
218Select all procedures? Y/N:
219Enter YES to select all procedures^or NO to select a single procedure.
220Answer with either: YES or NO
221Do you wish to print detailed reports? No//
222Enter YES to obtain detailed reports 'Procedure Detail by Requesting locations'^and 'Division Summary Requesting Location Details '.^Enter NO to skip the reports.
223 * Since you have added a new Imaging Location, remember to assign *
224 * it to a Rad/Nuc Med division through Division Parameter Set-up. *
225Do you wish to include inactive Imaging Locations
226Enter 'Yes' if inactive Imaging Locations are to be
227included, 'No' if only active locations are desired.
228Rad/Nuc Med Imaging Location Parameter List
229Select Camera/Equip/Room:
230Select a Rad/Nuc Med Division:
231Imaging Location file #79.1 internal entry #
232is a broken pointer to Hospital Location file #44.
233IRM must resolve this problem, then the Rad/Nuc Med ADPAC
234should use the Location Parameter Set-up [RA SYSLOC] option
235to edit this Imaging Location, and the Division Parameter
236Set-up [RA SYSDIV] option to assign it to a division.
237Imaging Location file #79.1 entry
238or invalid DSS ID. The Radiology/Nuclear Medicine ADPAC should
239use the Location Parameter Set-up [RA SYSLOC] option to enter
240a valid imaging DSS Code for this imaging location.
241 is not assigned
242to a Rad/Nuc Med Division. If Imaging exams are to be registered
243in this imaging location, or if there are incomplete exams
244already registered to this location, the Radiology/Nuclear
245Med ADPAC should use the Division Parameter Set-up [RA SYSDIV]
246option to assign this imaging location to the appropriate
247Rad/Nuc Med Division.
248Scheduling routine could not reset Hospital Location
249file #44 params for Imaging Location
250to agree with params on the Imaging Location file #79.1.
251IRM should investigate the cause of this Scheduling error message:
252Imaging Location
253 has appointment patterns, and
254cannot be 'pointed to' from a file 79.1 Imaging Location.
255 has been 're-pointed' to
256Hospital Location
257 is OK.
258>>> IMAGING TRANSCRIPTIONIST WORKLOAD REPORT <<<
259Rad/Nuc Med TRANSCRIPT RPT
260>>> IMAGING TRANSCRIPTION REPORT <<<
261# of Transcriptionists selected:
262RADIOLOGY/NUCLEAR MEDICINE PERSONNEL
263NUMBER OF LINES
264NUMBER OF REPORTS
265In this division there were no reports found for the transcriptionists selected.
266Rad/Nuc Med
267You must select a printer for this output.
268Must be a user with the appropriate privileges to continue!
269The following is a list of possible devices. You must choose
270one of these by entering in the device's full name.
271NOTE: This field is not a pointer field to file 3.5!
272Device Name:
273Device Location:
274 to stop)
275Sorry, that's not your access code. Try again.
276Enter your access code or an uparrow to exit.
277YOU ARE NOT IN THE 'NEW PERSON' FILE. CONTACT YOUR IRM SERVICE
278Since you have changed the procedure,
279will now be deleted.
280You have changed the procedure, but there are
281no data for Radiopharmaceuticals and Meds to delete.
282Rad/Nuc Med UPDATE STATUS OF ONE REPORT
283Status update queued!
284Rad/Nuc Med UPDATE STATUSES OF MULTIPLE REPORTS
285Status updates queued!
286Attempting to credit a clinic stop.
287Clinic Stop credited.
288Unable to credit a clinic stop!
289Missing STOP CODE data
290No Principal Clinic entered for '
291RAD/NUC MED CREDIT STOP ERROR
292Abnormal
293Imaging Results:
294Amended/
295Amended
296Can't continue --- No 'MINUTES' function found in File Manager
297Neg. Time
298Exam has been 'cancelled' therefore the status cannot be changed.
299...exam status remains '
300...will now designate exam status as '
301'... for case no.
302...exam status
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.